Art. 270 - Joiner's set square with a handgrip made of painted and ground aluminium on all sides. Two-tone (red and yellow) painted C70 carbon steel blade. Millimetre scale printed on both sides of the blade.
| Code | Dimension | Packaging | Barcode |
|---|---|---|---|
270/20 270/25 270/30 270/35 270/40 270/50 |
200 mm 250 mm 300 mm 350 mm 400 mm 500 mm |
12 pcs 12 pcs 12 pcs 12 pcs 12 pcs 12 pcs |
8015187003258 8015187003265 8015187003272 8015187003289 8015187003296 8015187003302 |
Art. 271 - Aluminium carpenter’s try square. Stainless steel blade with engraved millimeter scale on both sides.
| Code | Dimension | Packaging | Barcode |
|---|---|---|---|
271/30 271/40 271/50 |
300 mm 400 mm 500 mm |
6 pcs 6 pcs 6 pcs |
8015187007829 8015187007836 8015187007843 |
Art. 272/40 - 40cm - 0° ÷ 180°
| Code | Dimension | Vials | Packaging | Barcode |
|---|---|---|---|---|
| 272/40 | 400 mm | 2 | 1 | 8015187006389 |
Art. 273 - Solid steel carpenter's set square. Cross-section 30 x 5 mm. Red.
| Code | Dimension | Packaging | Barcode |
|---|---|---|---|
273/50 273/60 273/80 273/100 |
500 mm 600 mm 800 mm 1000 mm |
10 pcs 10 pcs 10 pcs 10 pcs |
8015187006075 8015187006082 8015187006099 8015187006105 |
Art. 275-Square with die-cast aluminium handle, moving steel blade used to measure at any angle. Central blade wing nut lock. Handle: 10 cm. Blade: 25 cm.
| Code | Dimension | Packaging | Blister | Barcode |
|---|---|---|---|---|
| 275/25 | 250 mm | 25 pcs | X | 8015187000219 |
Art. 276 - Inox stainless steel square with back, Precision DIN 875/0
| Code | Dimension | Packaging | Barcode |
|---|---|---|---|
276/150 276/200 |
150 x 100 mm 200 x 130 mm |
1 pcs 1 pcs |
8015187008239 8015187008246 |
Art. 277 - Flat inox stainless steel square with back, Precision DIN 875/0
| Code | Dimension | Packaging | Barcode |
|---|---|---|---|
277/150 277/200 |
150 x 100 mm 200 x 130 mm |
1 pcs 1 pcs |
8015187008253 8015187008260 |
